Magnum MMG75D Manual do Operador descarregar pdf (Página 15)

1. POWER ZONE™ CONTROLLER: Refer to page 16 for additional information.

2. 50A CIRCUIT BREAKERS (3): Circuit breakters for the 120/240V twist-lock receptacles.

3. 120V GFCI DUPLEX RECEPTACLES (2): Receptacles for additional equipment that may require Ground Fault

Circuit Interrupt (GFCI) protection.

4. 20A CIRCUIT BREAKERS (2): Circuit breakters for the 120V GFCI receptacles.

5. REMOTE START TERMINAL BLOCK: Used to connect the generator to a dry-contact closure switch for remote

starting of the generator.

6. 120/240V TWIST-LOCK RECEPTACLES (3): These receptacles are used for connecting additional loads or

equipment to the generator in 240 and 208 voltage selections only.

7. GENERATOR GROUND CONNECTION LUG: This lug is for connecting a good earthen ground per local, state

or National Electrical Code (NEC) guidelines before starting the generator.

8. GENERATOR OUTPUT CONNECTION LUGS: These lugs allow appropriate loads to be wired directly to the

generator.

9. DOOR SAFETY SWITCHES: The connection lug door is equipped with safety interlock switches that will trip

the main circuit breaker and disable the voltage regulator if the door is opened while the unit is operating.

10. DIESEL EXHAUST FILTER CLEANING SWITCH: This switch toggles between enabling and disabling the auto

exhaust cleaning feature and entering manual regeneration. Refer to page 29 for more information on diesel

exhaust filter cleaning operation.

11. AUXILLIARY LIGHT SWITCHES (OPTIONAL): These switches operate the control panel and interior lights.

12. MAIN CIRCUIT BREAKER: This breaker will disconnect power to the connection lugs (items 8-9). It WILL NOT

disconnect power to the receptacles when the engine is running.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Sem comentários

Magnum MMG75D Manual do Operador Página 15